Weather climate every day?
- Thread starter MigX
- Start date
- Joined
- Mar 21, 2003
- Messages
- 1,032
Not At my PC so from memory. you need 4 lines.
CREATE_WEATHER_ x,y is the centre of the weather pattern z is the radius it affects.
" " " " " " _RAIN sets up the start finish and how heavy.
" " " " " " _ TEMP sets the temperature if low enough it will snow. And duration of the temps.
" " " " " " _WIND well wind
Copy a block from one of the existing maps I remember using land 4 to get one.
Add the code to your skirmish map. Then adjust the values X&Y to the centre of your map and Z for the size.
From this point you can adjust the values to get what you want.
CREATE_WEATHER_ x,y is the centre of the weather pattern z is the radius it affects.
" " " " " " _RAIN sets up the start finish and how heavy.
" " " " " " _ TEMP sets the temperature if low enough it will snow. And duration of the temps.
" " " " " " _WIND well wind
Copy a block from one of the existing maps I remember using land 4 to get one.
Add the code to your skirmish map. Then adjust the values X&Y to the centre of your map and Z for the size.
From this point you can adjust the values to get what you want.
- Joined
- Mar 21, 2003
- Messages
- 1,032
No it has to be done for each map...Maybe several times if you want different weather in different areas as in land2 warm one end snowy the other.
Only you know the size and position of the weather you want.
Only you know the size of the map you are working on.
Use your 1.04 mapping list and a pre written block to start.
It may look daunting at first but it is really quite simple to get something up and working.
Example I want to curse a town with bad weather..... the centre of the town is 2500, 1000
ORIGINAL BLOCK
CREATE_WEATHER_CLIMATE(3, 5, "2831.67,1851.43", 385.833344, 477.500000)
CREATE_WEATHER_CLIMATE_RAIN(3, 0.800000, 0, 80, 0)
CREATE_WEATHER_CLIMATE_TEMP(3, 8.000000, 8.000000)
CREATE_WEATHER_CLIMATE_WIND(3, 0.000000, 0.000000, 1.105375)
EDITED BLOCK
CREATE_WEATHER_CLIMATE(1, 3, "2500,1000", 300, 200)
CREATE_WEATHER_CLIMATE_RAIN(1, 1, 0, 80, 0)
CREATE_WEATHER_CLIMATE_TEMP(1, 40, 40)
CREATE_WEATHER_CLIMATE_WIND(1, 0, 0, 1)
All you should really need to do now is edit line 1 to your position and size.
Only you know the size and position of the weather you want.
Only you know the size of the map you are working on.
Use your 1.04 mapping list and a pre written block to start.
It may look daunting at first but it is really quite simple to get something up and working.
Example I want to curse a town with bad weather..... the centre of the town is 2500, 1000
ORIGINAL BLOCK
CREATE_WEATHER_CLIMATE(3, 5, "2831.67,1851.43", 385.833344, 477.500000)
CREATE_WEATHER_CLIMATE_RAIN(3, 0.800000, 0, 80, 0)
CREATE_WEATHER_CLIMATE_TEMP(3, 8.000000, 8.000000)
CREATE_WEATHER_CLIMATE_WIND(3, 0.000000, 0.000000, 1.105375)
EDITED BLOCK
CREATE_WEATHER_CLIMATE(1, 3, "2500,1000", 300, 200)
CREATE_WEATHER_CLIMATE_RAIN(1, 1, 0, 80, 0)
CREATE_WEATHER_CLIMATE_TEMP(1, 40, 40)
CREATE_WEATHER_CLIMATE_WIND(1, 0, 0, 1)
All you should really need to do now is edit line 1 to your position and size.